Una dritta per raffica

[paricutin]

Ma guarda tu che diavolo si inventano...

http://www.ares-gun.sk/?lang=english

[Blackrifle]

Ossignur

[rommel]

mi sembrano da fricchettone...

[radioamerica]

stupende....io le voglio rosa...

[Blackrifle]

Niente puntini verdi?

[radioamerica]

no....verde direi di no.....

[nitronori]

Beeeeeeeelle!

Luca, in gara faremo un "figurone"

[phobos]

Che roba....forti pero'....

[eltabaker]

Ma a che pro?

[nitronori]

Credo che servano a "fumare" meno, aumentare la scorrevolezza in canna ed eliminare il contatto delle mani con il piombo nudo!

[eltabaker]

Credo che servano a "fumare" meno, aumentare la scorrevolezza in canna ed eliminare il contatto delle mani con il piombo nudo!

Ma allora di cosa sono rivestite?

[nitronori]

Da quanto ho capito io da una letta sul forum di Brian Enos, sono rivestite di una resina particolare, molto refrattaria al calore.

[radioamerica]

le hanno dipinte con i colori indelebili "Giotto"

[nitronori]

Qui c'è un post dal forum ipsc!








Hi everybody,

Since a little a crew of IPSC shooters are producing bullets intended to competition and training. It's as some says "Made for Shooters, by Shooters"



Almost all of our top shooters use them since 2008 - "Dynamic Arms Sports Ammo". The bullet is lead molded with polymer/polyester coating. All handgun and most rifle calibers available in large variety of weight and form.

Some of the Benefits:

- less felt recoil;
- easy to reload;
- almost no smoke at shot;
- longer barrel life;
- last but not least - much better price;

The tools and machines are MAGMA, one of the best when it comes to quality and regularity! We offer free samples and looking for dealer/distributor enquiries.

For pricing and quantities, please send an e-mail (akussev@hotmail.com)or skype me at: kouzi78





QUOTE (Alexandre Koussev @ 23 Feb 2010, 01:31 pm)
Almost all of our top shooters use them since 2008 - "Dynamic Arms Sports Ammo". The bullet is lead molded with polymer/polyester coating. All handgun and most rifle calibers available in large variety of weight and form.

The tools and machines are MAGMA, one of the best when it comes to quality and regularity! We offer free samples and looking for dealer/distributor enquiries.

For pricing and quantities, please send an e-mail (akussev@hotmail.com)or skype me at: kouzi78

Alexandre:

Sounds interesting. Is your website www.Dynamicarmssportsammo.com?


--------------------
Roger Madiou



Alexandre Kousse...
24 Feb 2010, 11:11 am
Post #3



Hi Roger,
Thanks for your interest,
New site under construction, available all info and pics soon.

The polymer coating is very atractive, f.ex. - shooting a 200gr bullet in .40 feels like shooting a 180gr. and you save for the same P.F. approx 10-15% of powder




QUOTE (Alexandre Koussev @ 24 Feb 2010, 09:11 am)
Hi Roger,
Thanks for your interest,
New site under construction, available all info and pics soon.

The polymer coating is very atractive, f.ex. - shooting a 200gr bullet in .40 feels like shooting a 180gr. and you save for the same P.F. approx 10-15% of powder

Alexandre:

Look forward to viewing your website.





Hi all,

Here are some pics of spent bullets and a new ones.

And attached list of forms and weight of bullets.

First samples went yesterday, thanks for the interest, hope you'll be satisfied

Available colors for the polymer coating:
http://plasto.bg/articledetails.php?ArticleID=25
Attached thumbnail(s)
Reduced 94%

3072 x 2304 (548.36K)


Attached File(s)
MagmaBullet.pdf ( 1.67MB ) Number of downloads: 102



Hi Roger,
Thanks for your interest,
New site under construction, available all info and pics soon.

The polymer coating is very atractive, f.ex. - shooting a 200gr bullet in .40 feels like shooting a 180gr. and you save for the same P.F. approx 10-15% of powder

What about polymer vaporization? Does it build up in the barrel?

Also, the copper coated or jacketed bullets are protecting shooters from inhale the lead, but what about polymer coated ones, do they stand high velocities, and is vaporized polymer coating safe to inhale?

Thanks



Alexandre Kousse...
2 Mar 2010, 08:21 pm
Post #7


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



QUOTE (Eugene Kuleshov @ 2 Mar 2010, 03:49 pm)
What about polymer vaporization? Does it build up in the barrel?

Also, the copper coated or jacketed bullets are protecting shooters from inhale the lead, but what about polymer coated ones, do they stand high velocities, and is vaporized polymer coating safe to inhale?

Thanks
Hi Eugene,

As you can see on the pics, all coating stays on the bullet after he left barrel.( black marks on bullet come from rubber back stop on our indoor range)
This polymer coating is a result of almost 3 years testing in real conditions before putting it on the market - so NO lead/polymer in the air!

We are even making .223 and .308 which may at higher speeds can be supplied with gas checks, but in this case also the gas check is only for the bottom of the bullet.

Hope this info is useful :-)

This post has been edited by Alexandre Koussev: 2 Mar 2010, 08:23 pm


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Alexandre Kousse...
4 Mar 2010, 01:39 pm
Post #8


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



QUOTE (Eugene Kuleshov @ 2 Mar 2010, 04:49 pm)
What about polymer vaporization? Does it build up in the barrel?

Also, the copper coated or jacketed bullets are protecting shooters from inhale the lead, but what about polymer coated ones, do they stand high velocities, and is vaporized polymer coating safe to inhale?

Thanks

We use two kinds of polymer coating:
- polyester: there is no smell and smoke! It's not harmful for human health, mostly for indoor shooting;

- epoxy-polyester: there is a little smoke and smell but less felt recoil, it's appropriate for outdoor ranges :-)

P.S.

The 9mm bullet on the pic is 125gr, sorry


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Manolis Samarita...
4 Mar 2010, 03:29 pm
Post #9


Newbie


Group: Member
Posts: 7
Joined: 10-July 06
From: Greece
Member No.: 3,916



QUOTE (Alexandre Koussev @ 4 Mar 2010, 12:39 pm)
We use two kinds of polymer coating:
- polyester: there is no smell and smoke! It's not harmful for human health, mostly for indoor shooting;

- epoxy-polyester: there is a little smoke and smell but less felt recoil, it's appropriate for outdoor ranges :-)

P.S.

The 9mm bullet on the pic is 125gr, sorry


Nice job.
I like the colored bullets.
Is your factory in Bulgaria?



Alexandre Kousse...
4 Mar 2010, 10:38 pm
Post #10


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



QUOTE (Manolis Samaritakis @ 4 Mar 2010, 02:29 pm)
Nice job.
I like the colored bullets.
Is your factory in Bulgaria?
Thanks Manolis,
yes factory near Sofia



--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Alexandre Kousse...
15 Mar 2010, 07:28 pm
Post #11


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



Official site for the bullets:
http://ammo.dynamic-arms.com


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Alexandre Kousse...
29 Mar 2010, 02:14 pm
Post #12


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



QUOTE (Alexandre Koussev @ 15 Mar 2010, 05:28 pm)
Official site for the bullets:
http://ammo.dynamic-arms.com
Hi all,
We now offer a possibility for custom diameter on all bullet sizes...isn't a flexibility a nice thing in IPSC...
http://ammo.dynamic-arms.com/products.html


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Bjorn Dietrich
29 Mar 2010, 03:39 pm
Post #13


Spook


Group: Banned
Posts: 452
Joined: 11-January 05
From: Netherlands
Member No.: 19



Alexandre,

How do these bullets perform in barrels with polygon rifling, like Glocks, HK's etc?
Thanks.




Vince Pinto
29 Mar 2010, 06:50 pm
Post #14


IPSC Secretary


Group: Admin
Posts: 15,031
Joined: 31-December 04
From: Hong Kong
Member No.: 2



QUOTE (Alexandre Koussev @ 16 Mar 2010, 01:28 am)
Official site for the bullets:
Do you also make live rounds or just the heads?

IPSC would be interested in discussing Official Match Ammo with you if you make complete rounds.



--------------------
Vince Pinto
IPSC Secretary
IPSC Handgun Rules Director



Word Of The Month: a Pathological or Compulsive Liar is called a "MYTHOMANIAC"
Fiat justitia, ruat caelum (Caesoninus)
People who say "money can't buy everything" obviously don't know where to shop! (Pinto)
Our job is not to appeal to the lowest common denominator. Our job is to raise it. (Josiah Bartlet)



Alexandre Kousse...
30 Mar 2010, 11:51 am
Post #15


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



To Bjorn:
Tested in Glock and Tanfoglio, this Open and Limited pistols and works just fine!
Polygonal rifling is more gentle to the coating...

To Vince:
Yes we do make live rounds, for the moment only for the needs of our region (IPSC clubs and training purpose of some special units) If there is a need we can think bigger, specially for the cause

We can also work in partnership with a bigger manufacturers when it comes to large quantities...so nothing's impossible


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history



Peter van Dijk
30 Mar 2010, 04:33 pm
Post #16


Active Member


Group: Member
Posts: 110
Joined: 1-October 06
From: Netherlands
Member No.: 4,448



Since the price of bullets had gone up considerably (or affordable brands are not to be found), I guess there's a market for these bullets.



Luciano Arrigoni
31 Mar 2010, 02:16 pm
Post #17


Newbie


Group: Member
Posts: 9
Joined: 16-May 07
From: Italy
Member No.: 6,247



Can you say something about the pricees?
tks



Alexandre Kousse...
13 Apr 2010, 11:26 am
Post #18


Active Member


Group: Member
Posts: 141
Joined: 18-May 07
From: Bulgaria
Member No.: 6,264



Many of you have requested reloading info, so here it is:

Some tests for .40SW

All length 29.5 мм with slight crimp;
Shot in CZ 75 Tactical Sports;
Temp. approx. 20 degrees C;

1. Vihta N 330 - 4.5 grn + 200 grn. bullet colored = PF 176

2. Vihta 3N37 - 5.0 grn. + 200 grn colored bullet = 178 PF

3. Vihta N 320 -4.2grn. + same bullet = 172 PF

In .38SA with STI Trubor Hybrid and SVI Hybrid AET barrel:
Temp. 22-25 degrees C;

- 124gr / Vitha 3N37 / 0,485g / L 31,55 / Factor SVI 162,80 / Factor STI 155,00 /

- 124gr / Vitha 3N37 / 0,504g / L 31,55 / Factor SVI 167,80 / Factor STI 164,90 /

- 147gr / Vitha 3N37 / 0,378g / L 31,55 / Factor SVI 156,70 / Factor STI 152,90 /

- 147gr / Vitha 3N37 / 0,405g / L 31,90 / Factor SVI 163,70 / Factor STI 160,70 /


Thanks to our test-pilots


--------------------
www.ipscbg.org
www.npscdynamic.org/index.php?p=history

[JigenGiò]

Vedremo che futuro avranno le palle travestite modello Marrazzo
Nitro hai incollato il sito

[lucasb67]

Beeeeeeeelle!

Luca, in gara faremo un "figurone"

... più di quello che già facciamo sarà difficile, ma perchè mettere limiti alla provvidenza??



... a me sembrano terribili, ma sono comunque un gran utilizzatore delle "palle ricoperte" e non amo le blindate, almeno per il nostro giochino, per cui benvengano novità!!

[raffica]

Me le hanno segnalate tempo fà.
A parte il fatto che mi fà strano vedere pallottole colorate,dalle risposte lette nel forum ,sono state collaudate e messe a punto per ben tre anni prima di proporle ,per cui credo che il prodotto sia valido.

[paricutin]

mi fà strano vedere pallottole colorate

In effetti è un po' come vedere un uomo con le unghie dei piedi smaltate (horribile visu!!!)

[NdK]

Già se vedi le unghie dei piedi di un uomo... uhm...